abe® bitumen manhole sealer for sealing of concrete butt joints in pre-cast elements

• Non-hardening, permanently flexible
• Excellent sealing properties
• Contains no VOCs
• Unaffected by water, mineral acids, alkalis & salts
• Pressure Sensitive
• Easy to apply

Quantity Estimates:

Surfaces should be clean, sound and dry prior to application. 

Porous surfaces may be primed with a thin uniform film of abe^® butyl Primer which is allowed to tack dry prior to application of abe^® bitumen manhole sealer.

Apply strips to desired length and hand mould the pre-formed strip to the desired contour.

Remove applied material mechanically and clean surface with abe^® super brush cleaner. 

Joints mechanically held in tension where indicated will be protected from ingress or egress of liquid with abe^® bitumen manhole sealer.

Store in original packaging in a cool, dry place. Maximum recommended shelf life is 12 months.

abe^® bitumen manhole sealer should not be allowed contact with skin and eyes. The use of gloves and eye protection is advised.

abe^® bitumen manhole sealer is inert and harmless.

This data sheet is issued as a guide to the use of the product(s) concerned. Whilst a.b.e.^® endeavours to ensure that any advice, recommendation, specification or information is accurate and correct, the company cannot accept any liability for application – because a.b.e.^® has no direct or continuous control over where and how a.b.e.^® products are applied.

Where other products are to be used in conjunction with this material, the relevant technical data sheets should be consulted to determine total
requirements.

a.b.e.^® has a wealth of technical and practical experience built up over the years in the company’s pursuit of excellence in building and construction
technology.