Concrete and Mortar Waterproofer.
dura.®proof is an additive containing fine particles which combine with the lime in the cement to form water-repellent particles. These obstruct the capillary action within concrete.
All types of cements (except aluminous).
- Concrete for foundations under the water table.
- Concrete for reservoirs and tanks.
- Sealing grout for tanks.
- Concrete and mortar in regular contact with water.
Advantages
- Enhances the waterproofing qualities of concrete, mortar and plaster.
- Does not modify the characteristics of fresh concrete.
- Does not affect the compressive strength of concrete.
Mixing
Stir well before use.
Coverage
Dosage: 1 L / 50 kg (pocket) of cement.
Dosage
1 to 3,5kg each 100kg of cement. A 1.5% dosage of the product to the weight of cement is commonly used.
Applications
dura.®proof is completely miscible in water. It must be added to the mixing water. The optimum dosage of dura.®proof can only be established after trial tests, taking into account local conditions affecting the workability of the mix and the mechanical properties required from the concrete.
Typical Physical Properties
| Consistency | Liquid |
| Density (typical) | 1,00 g/m3 ± 0,01 |
| Colour | Iridescent blue |
| pH | 8,5 ± 1 |
| Freezing point | About -1° C |
| CI ions content | Nil to BS 5075 |
| Na2O equivalent | < 0,1% |
| Dry extract | 6% ± 0,6% |
Cleaning
Tools, brushes and mixing equipment should be cleaned immediately after use and before material has set with abe® super brush cleaner followed by washing with soap and water.
Protection on Completion
The newly applied mortar/concrete must be kept damp for at least five days to promote good curing.
Temperature & Relative Humidity
Do not apply concrete if temperature is below 5°C.
Model Specification
A chloride-free, water-reducing additive to reduce the water absorption qualities of all concrete, mortar or plaster. The additive will be dura.®proof, a chloride-free, water-reducing admixture applied in accordance with the recommendations of a.b.e.® Construction Chemicals. The admixture will comply with the requirements of ASTM C494F and PTV 500.
Packaging
dura.®proof is supplied in 1L, 5L and 25L containers
Handling & Storage
This product has a shelf life of 12 months if kept in a dry cool place in the original packaging. In more extreme conditions this period might be shortened.
Health & Safety
dura.®proof should not be allowed contact with skin and eyes. Avoid inhalation during mixing by wearing masks. The use of gloves, eye protection and masks is advised. Splashes into eyes should be washed immediately with plenty of clean water and medical advice sought thereafter.
Conformity
dura.®proof is a superplasticiser for high performance concrete which conforms to NF-EN 934-2. dura.®proof conforms to ASTM C 494-F and Belgian PTV 500. All the constituents of dura.®proof are authorised according to the French regulations to be used in the fabrication of concrete and mortar products that come into contact with potable water. A copy certificate of conformity is available.
Important Note
This data sheet is issued as a guide to the use of the product(s) concerned. Whilst a.b.e.® Construction Chemicals endeavours to ensure that any advice, recommendation, specification or information is accurate and correct, the company cannot – because a.b.e.® Construction Chemicals has no direct or continuous control over where and how a.b.e.® Construction Chemicals’ products are applied – accept any liability either directly or indirectly arising from the use of a.b.e.® Construction Chemicals’ products, whether or not in accordance with any advice, specification, recommendation or information given by the company.
Further Information
Where other products are to be used in conjunction with this material, the relevant technical data sheets should be consulted to determine total requirements. a.b.e.® Construction Chemicals has a wealth of technical and practical experience built up over years in the company’s pursuit of excellence in building and construction technology.